FilmTec™ SW30XLE-440 WET
In stock
Only %1 left
SKU
DWNA-FILMTECSW30XLE440WET
$689.00
- FILMTEC™ SW30XLE–440 Elements offer medium-salinity and medium-temperature feed waters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design. It is also an excellent choice for two-pass seawater designs or high salinity brackish water applications. The combination of high active area and thick feed spacer of the FILMTEC™ membranes facilitates high productivity and low cleaning frequency which enable sustainable low lifecycle cost. Benefits of the FILMTEC™ SW30XLE–440 element include: l High active area of 440 ft2 (41 m2) permits low system capital cost by maximizing productivity and enables accurate and predictable system design and operating flux. l The combination of high active area with thick feed spacer (28 mil) allows low cleaning frequency and high cleaning efficiency. l Sustainable high performance over the operating lifetime, because oxidative treatments are not used in membrane production. This is one reason FILMTEC™ elements are more durable and may be cleaned more effectively over a wider pH range (1 – 13) than most other RO elements, which use oxidative treatments. l Effective use in permeate staged seawater desalination systems without impairing the performance of the downstream stage.
| Diameter (in) | 8.0 |
|---|---|
| Stabilized Salt Rejection (%) | 99.8 |
| Permeate Flow (GPD) | 9900 |
| Length (in) | 40.0 |
| Minimum Salt Rejection (%) | 99.6 |
| Min/Max cleaning pH | 1-13 |
| Membrane Type | Seawater |
| Max dP (psi) | 15.0 |
| Active Area (ft2) | 440 |
| Feed spacer (mil) | 28.0 |
| Applied Pressure (psi) | 800.0 |
| Application | Drinking Water, High Salinity Brackish Water |